jcramsey
Well-Known Member
- Joined
- Jul 22, 2009
- Location
- Marion, NC
Got an elocker rear axle out of a 3rd gen (96-02) 4Runner. Wiring harness is intact. $1000
Tom Woods double cardan driveshaft for 3rd gen 4runner. In great shape. Have both ends…you can see the yoke still attached to the axle. $450
Also have a Powerstop KCOE2324 rotor/caliper/pads kit for a 2000-2005 Tundra that is a common upgrade for the 3rd gen 4Runners. I had it installed for a couple hundred miles but could never get it dialed in, so I switched back to stock brakes. $295
Tom Woods double cardan driveshaft for 3rd gen 4runner. In great shape. Have both ends…you can see the yoke still attached to the axle. $450
Also have a Powerstop KCOE2324 rotor/caliper/pads kit for a 2000-2005 Tundra that is a common upgrade for the 3rd gen 4Runners. I had it installed for a couple hundred miles but could never get it dialed in, so I switched back to stock brakes. $295
Last edited: