maulcruiser
Well-Known Member
- Joined
- Aug 13, 2005
- Location
- Bladenboro/Wilmington, NC
Title says it all. I need the transfer case adapter from a 465 to 208 or 241.
465/208 or 241 transfer case adapter
- Thread starter maulcruiser
- Start date
Shreddinlettuce
Well-Known Member
- Joined
- Nov 20, 2016
- Location
- Hickory
There are 3 potential output shafts on a 465. 10 spline short and 32 long and 35 spline (2wd)
Shortest option is Novak which comes with a new short output shaft and tailhousing adapter.
Advanced makes a spur shaft with adapter for a d300 or np241 for 2wd versions that requires cutting the tail shaft (angle grinder and hose clamp as a guide)
Which one you got?
Shortest option is Novak which comes with a new short output shaft and tailhousing adapter.
Advanced makes a spur shaft with adapter for a d300 or np241 for 2wd versions that requires cutting the tail shaft (angle grinder and hose clamp as a guide)
Which one you got?
maulcruiser
Well-Known Member
- Joined
- Aug 13, 2005
- Location
- Bladenboro/Wilmington, NC
I have the 32 spline long output mated to an NP205. I want to run the Titan box from NWF. After speaking on the phone with them, they said I needed the slightly shorter 465/208 adapter if I wanted to keep my existing combo, while still making the Titan box work.