63" cevy springs.. what shackles and mounts??

8secride

Well-Known Member
Joined
Sep 25, 2009
Location
wilkes
i ordered the highsteer kit, and plan on doing chevys and rears up front. what size mounts and shackles do i need to buy? and wide or narrow for the rear??

also when i do the rears up front what mounts and shackles will i need then?? thanks
 
There's a ton of info out there but it would be nice to know what the heck you are working on. :bronco:
 
check out the link posted above. this will answer any questions you may have. also take a look at sky manufacturing's 63 kit and budbuilt banana shackles for the front.
 
88yota said:
check out the link posted above. this will answer any questions you may have. also take a look at sky manufacturing's 63 kit and budbuilt banana shackles for the front.
Click to expand...
x2
 
Just to stir the pot a little, I will state that I hate 63" chevy springs on a Toyota. I would very much prefer the Ford springs if you want to fab stuff, 56" F150's or something?,

Brokeass4runner may have some for sell. Make sure you ask him if they are for sell, not for sale, he will give you a better deal.

My personal spring choice for that truck would be the 89-95 4wd Toyota rears in the stock brackets with a (IIRC) 6-6.5" long shackle, stays nice and low, flexes plenty, and best of all, easier/cheaper and less time consuming. Put all that time/money into some low gears/lockers and or longs.

My 2cents. :beer:
 
Back
Top