8 lug dana 44 low pinion identification

[marty79]

This chevy van I have has unknown to me a dana 44 8 lug low pinion with auto locking hubs.
We need to convert to manual hubs so trying to figure out what this axle is. Any help would be appreciated thanks

 

[XJsavage]

That might be a 75 or 76 Ford. I thought most were closed knuckle though.

 

[Junkyard Dog]

Those are ford calipers, in my experience most setups like aren't "an axle out of something else". Most where built vehicle specific. But it looks like about any d44 internal lockout will work.

 

[paradisePWoffrd]

Those are ford calipers, in my experience most setups like aren't "an axle out of something else". Most where built vehicle specific. But it looks like about any d44 internal lockout will work.

x2. My guess is the axle shaft is 19spline. If so, any d44 lockout should work.

 

[skyhighZJ]

That 4X4 emblem on the hubs is Chevy.

 

[marty79]

But it looks like about any d44 internal lockout will work.

x2. My guess is the axle shaft is 19spline. If so, any d44 lockout should work.

Thanks guys that's what I was hoping/thinking.
Sorry for late response crazy busy day

 

[marty79]

That 4X4 emblem on the hubs is Chevy.
hubs still be the same even if Chevy axle

 

[marty79]

Ok I dont know how the heck I just did that lol but oops

 

[Van-go]

Looks like a 44 I had a while back. Made specifically for pathfinder 4x4 van conversions.
https://nc4x4.com/forum/threads/old-adapter-anyone-ever-heard-of-this-brand.196233/#post-1745521 does it have the same th400 as this?

 

[marty79]

Looks like a 44 I had a while back. Made specifically for pathfinder 4x4 van conversions.
https://nc4x4.com/forum/threads/old-adapter-anyone-ever-heard-of-this-brand.196233/#post-1745521 does it have the same th400 as this?

I got it figured out but yeah, same as that conversion

 

[Van-go]