84 wagoneer 360/727 efi setup

marty79

marty79

the LS Swap Guy
Joined
Nov 24, 2013
Location
Conover, NC
Customer brought me this Wagoneer from Florida after he had the motor rebuilt and he didn't want to haul it all the way back down there for the warranty work so instead he's just doing an LT swap so what we have is a 360 that is all new but it was honed for Molly rings and they used chrome rings so obviously you can't do that so the Rings never seated was burning oil but everything's new, everything's there, yes it's all torn apart it just needs a new home job and the right Rings put in crank looks good the work was done well, they just use the wrong rings!?! new Pistons rods bored 30 over got the Edelbrock intake with the sump pump adjustable EFI system
20260216_111103.jpg
20260216_111043.jpg
20260216_111035.jpg
20260216_110928.jpg
20260216_110524.jpg
20260216_110518.jpg
20260216_105702.jpg
20260216_105658.jpg
20260216_105652.jpg
20260216_104310.jpg
20260216_104305.jpg
20260216_104236.jpg
20260216_104220.jpg
20260216_104144.jpg
20260216_104107.jpg
make him a good offer, thinking $3000?? for everything motor/trans/efi system (trans has 100k on it, drove shifted good)
 
pushrods, lifters, accessories, ac compressor is new, belts, MSD wires and coil and distributor, shouldn't need anything other than a hone job and the proper rings call or text me for quicker response thanks
828-284-1302
 
Back
Top