87 Dodge ram 50 4X4 auto hubs not working

jp1m16

New Member
Joined
Apr 19, 2011
Location
Iowa
Hello all. Glad I found this site. My little ram will shift into 4 low or 4 high but It is not pulling. I am not sure what it is. I have heard that replacing hubs to lockouts might be the key.
My Q is how do you check the hubs to see if they are working or not? thanks ahead of time.
 
I think you just can spin the prop shaft to the front diff and you should see both shafts turn.. with the wheels off the ground, you'll see which side is not getting driven. at least thats how a ranger d35 TTB was. should apply similarly.
 
Back
Top