A904 and A999 (32rh) transmission same parts?

usmc42

Well-Known Member
Joined
Jan 21, 2015
Location
Jville
I need a rebuild kit for my 32rh out of a ‘98 TJ. Doesn’t seem to be much listed. Are the internals (clutches, seals) same as the a904 or any other TF-6 transmission?? Anyone know a good vendor for a 32rh rebuild kit?


Sent from my iPhone using Tapatalk
 
Haven't had much trouble with proking stuff. Very helpful people if you call the company. I think most of the 32rh stuff matches up. I know the 42/44/46/47/48re stuff matches between for the most part as far as clutches and seals go (except # of plates, but you can put 46 guts in a 42 case or vice versa) I'd get the right kit for the right application. RockAuto is cheap and fast. Advance has many kits at the warehouse also.. pm me if you go thru advance and I'll get you somewhat of a deal.
 
Thanks for the help guys!

Ended up going through transmissioncenter.net as they had the master kits with Alto Reds/Kolene steels and the good stuff for $127. Also got a Transgo shift kit and a rear main seal for the 4.0 while I was at it.

Everyone was right the a904/a999/32rh overhaul stuff is interchangeable.


Sent from my iPhone using Tapatalk
 
Yeah I figured I’d replace the pan gasket too. I got a new one and some fancy clips to hold it to the block while you bolt the pan in.


Sent from my iPhone using Tapatalk
 
Back
Top