dirtyjeeper
I Broked Sometin
- Joined
- Apr 27, 2012
- Location
- Boone
I am redoing the bearings in my chrysler 8.25 and I've gotten it down to setting the preload on the pinion. When I tighten the nut down all the way before torquing it down there is still play in the pinion. I got it to 150 ft lbs and there is still play. Will it take all the way to 200-210 ft lbs before the pinion even gets tight? I dont want to start crushing the sleeve if its supposed to be tight from the get-go.
98 jeep cherokee btw.
98 jeep cherokee btw.