any one want to help with SOA in charlotte

YJscott

Well-Known Member
Joined
Jan 13, 2006
Location
Charlotte
i would like to do it myself but have no welder and no welding abilites at this time. i can do the rest.

any one wanna help with welding that would be great! and ofcourse ill pay for all the supplies needed and all that good stuff.

im in charlotte
 
YJscott said:
i would like to do it myself but have no welder and no welding abilites at this time. i can do the rest.
any one wanna help with welding that would be great! and ofcourse ill pay for all the supplies needed and all that good stuff.
im in charlotte
Click to expand...

Seriously look into some helper springs or something your gonna have major torque wrap. there is an aftermarket kit that doesnt need any welding its completely bolt on. I did this on my 87 yj! It works great and you can put it on in your driveway! I did it in about 6 hrs. the problems I had were of my own fault. The stock springs are just way to weak and I wound up really screwing up my drive train. I think the spoa kit I bought was from quadratec for less than 500.
GOOD LUCK:driver:
 
DON'T get a bolt on kit if your really gonna wheel it. Get someone to help you with the welds, and fab a traction bar for the rear to reduce wrap. Cut the eyes off some main leafs and throw them in your packs if they are worn out, it'll only help.
 
tknopp said:
How soon would you want to do this project? Im in the middle of a CJ build up right now, but could help you later on.
Click to expand...


i really dont have a time i need to get it done by , i was thinking once it warms up a bit. and after i have everything i am going to need.
 
Back
Top