Anyone in W-S have a JD2 model 3? Need a favor.

catfishblues

catfishblues

Well-Known Member
Joined
Jul 26, 2005
Location
Pfafftown, NC
I need to borrow a die. I've taken an older Hughes Engineering model 3, the predecessor to the JD2, and modified it to operate as a newer bender. I want to know if I can buy off-the-shelf dies now, or if I have to have JD2 manufacture them specifically for me. They say they can, but I'm assuming it'll cost a premium. I would prefer a 1.25 or 1.5" 180° die, as that's the tube I've got lying around to test with, but I should be able to proof it out with anything. Thanks.
 
Mark I've got a 1.75 die your welcome to borrow. Just let me know
 
Awesome. I have a 1.75, too. I may just bring it by and see if the holes line up. Save me a return trip. Send me your number and I'll call you next time I can get out your way. Still off union cross?

Sent from my XT907 using Tapatalk
 
I'm off kernersville rd now. Near the intersection of kernersville rd and linville rd. Number is 705 0728 just let me know I'm home most evenings during the week.
 
Back
Top