Bars Products

orange150

orange150

Well-Known Member
Joined
Mar 20, 2005
Location
Fairfax City, VA
Mainly the rear main repair... for my '97 PSD. There is a fair amount of oil dripping down the bell housing of my tranny which is making me things it's the main, it's also dripping from passenger side of the oil pan, so maybe just the pan gasket?
I just dropped a lot of coin on a new clutch, rebuilding my front end, and rebuilding my steering column, so this blows.

So should I just drop some Bars in it and see what happens?
 
I would research what it may be before I did anything. Best to take it to somebody & have them do the uv & dye test to find the leak. I wouldn't use any additives or block sealers.
 
^^^I agree...my thought on the subject is, the BAR's isn't smart enough to know exactly what needs to be plugged, so it'll be circulated and sludging up everything in your engine. Not to mention, the stuff is supposed to swell the seal, it might last 5 minutes or 5 years...you don't really know, but when it goes again, it'll be even worse.
 
If the o-rings on the high preesure oil pump are leaking it will show up in the same area.
 
Back
Top