brake proportioning valve

cj7wheeler

New Member
Joined
Aug 13, 2007
Location
south carolina
i have proportioning valve from a 91 yj and i need to know what lines go were on it. when you look at it with the bleed pen (as i call it) facing right. it has 2 places on top 2 on bottom and one on the left side. so if anyone has anything that could help me it would be very helpful, thanks.
 
the "front" port is the rear brakes... the rear two ports next to eachother on adjoining sides are for the front brakes.

the top ports go to the MC.... the front to the front, the rear to the rear....
 
yes it does.....

the front input on the prop valve (for the rear brakes) should go to the front resevoir on the master cylinder... and the rear input of the prop valve to the rear output of the MC...
 
no problem... someone parked thei YJ in my driveway so i figured i might as well make good use of it..... little did i know it was a 91, haha....

-Erik <--- wonders who's jeep this is
 
Back
Top