Cargo Trailer Conversion for sale

VortecJeep

VortecJeep

Powered by Uranium-235
Joined
Aug 24, 2005
Location
Concord, NC
Just don’t use the Tramper enough, so putting it up for sale.
Asking $10,900.

Special ordered from Kaufman in 2020.
8.5x24 plus v-nose
Extended tongue
Extra height 7’6” interior height
one-piece roof
RV style door
5.2k axles
1.5” lift kit installed
rooftop AC
insulated walls and ceiling
two windows
50 amp electrical hookup
bogey wheels on the back
floating vinyl plank flooring, could easily be removed if you don’t like it.

RV toilet
Full-size shower
On-demand propane water heater
9-gallon black tank, 20-something gallon portable waste tank (never used it).
I have 4 scissor levelers, I don’t have them mounted, I just use them loose.

Kitchen area has sink and cabinets plus a counter top that folds down against the wall.

The murphy-bed is a twin size, fine for a kid, as an adult I wouldn’t be comfortable in it. I can remove it if you don’t want it.

Fits my TJ on full-width Bronco axles with room to spare.



IMG_8463.jpeg
IMG_8464.jpeg
IMG_8467.jpeg
IMG_8465.jpeg
IMG_8466.jpeg
IMG_8468.jpeg
IMG_8469.jpeg
 
Daggone it .this is a great deal

Add a pic of the jeep in there if you can.

He towed this up to Kairos and camped in it the whole weekend. If you've been to Kairos you know that entry road ain't no joke. Lots of work and detail in this trailer that you'd pay a great deal more for.
 
This was before the floor was done, but you can see how much room i front of the TJ I have. We normally tie the queen mattress up to the kitchen counter for transportation.
IMG_2877_Original.jpeg


And here is a backside pic

IMG_3363_Original.jpeg


A couple setups at Kairos:
IMG_3368_Original.jpeg
IMG_4823_Original.jpeg


This was how the wife and I setup without the kids:
IMG_3367_Original.jpeg


When the kids went, we put the murphy bed down and a twin perpendicular under it with our queen bed in front of that.

IMG_4814_Original.jpeg
 
Stuntman Autoworks said:
What is the door opening width and height?
Click to expand...

VortecJeep said:
Ramp door: 7’1” door opening height.

The ramp door opening width is wider than the distance between the fender wells, which is 82 1/2”, but I don’t remember exact dimension.

I can get a good measurement Thursday.
Click to expand...
I measured the width today:
ramp door width is 89-3/4”.
82” between the fender wells.
 
Do you do weekend rentals? I hear it’s gonna be 18 degrees at Uwharrie on Friday night and for some stupid reason I plan to be there.
 
Back
Top