Check these bearings out:

[XJ99]

Pulled apart a Dana 35 yesterday, and this is what the inside looked like:


http://www.youtube.com/watch?v=rz8WJi4HMSE




Not so good.....

The metal floating around did a number on the gears..

 

[Spence]

heres the best solution to that problem

 

[Degausser]

The same thing happened to my 8.25.

 

[vanguard]

Bah, I'd run it.

 

[jeepinmatt]

Those pics look about right for a D35. At least thats what the inside of mine generally looked like everytime I took it apart.

 

[rocktoy4me]

i see a 8.8 (or 9", D44, D60, etc...) in your near future....

It will be just about as cheap as fixing the D35....and better in the long run.

 

[D'Mann]

i see a 8.8 (or 9", D44, D60, etc...) in your near future....

It will be just about as cheap as fixing the D35....and better in the long run.

Gino is just fixing it for the guy. I think the guys wants to go back to stock.(3.07's)

Sucks don't it?

 

[XJ99]

Gino is just fixing it for the guy. I think the guys wants to go back to stock.(3.07's)

Sucks don't it?

Yeah, it's not my rig.. He says he doesn't wheel it, and wants to go back to the 3.07's.

 

[prettyboyinatj]

hell yeah

Looks like some of my handy work but i think that mine was more burntfrom no fluid ha ha

 

[jeepinmatt]

Hey, Ive got some 3.07's sitting in my shop if he needs. With the carriers.

 

[Elliott]

Thats what happened when mine took a dump. It makes a great noise going down the road with all that grinding noise. My built 8.8 was a good cure for that.

 

[Tradarcher]

Should have at least saved the cover and pinion yoke.

 

[mbalbritton]

dude.. some fresh Gear oil and you'd be fine

 

[XJ99]

Hey, Ive got some 3.07's sitting in my shop if he needs. With the carriers.

He already bought the parts, but thanks for the offer.