Comanche help

[Sappersoldier88]

Anyone in the raleigh area interested in lending a hand to a fellow NC 4x4 guy, got beer in the fridge and food if you wanna help. Im on spring break this week so i figured id get some stuff done. All my friends spent their money on vacations where as I had to work this weekend and missed the trip boat. So having an extra hand in the garage is nice, let me know if your interested, Im willing to work day or night or both. Just give me a shout, my names Austin, 704-608-3746

 

[pgaloustian]

whatcha got going on man?

 

[Sappersoldier88]

probably pulling the front suspension and sanding a few pieces and repainting, just cleaned the bed to spray it with bed liner.

Thats about all i think i can get done this week. If i can find a ford 8.8 with factory limited slip and 4.10s that would be awesome.

Also a Dana 30 HP non disco.

But for now just cleaning up the rust.

Thanks!

 

[pgaloustian]

check Pull a Part, they have dana 30 non disco for $160! look for an 8.8 there as well since they are the same price!

http://foureyedpride.com/joom/index...ag-decoder&catid=23:fordmerc-decode&Itemid=40

hope that helps, if not ill take pics of my 8.8 id tag so you know what to look for

 

[Sappersoldier88]

Thanks man, i actually stopped by there yesterday and found an 8.8, according to the door code, has 4.10s with Limited Slip. Only down side was it was missing an axle shaft and the left brake assemply was bent, so need to find those then ill be set! East Coast Gear Supply has a set of stock replacement yukon axle shafts i can get for 210, so i may consider that.

It started pouring there yesterday, so after i got done get that beast of an axle out, i just left. Ill probably go back today.

Correct me if im wrong, if i can find a front HP non disco Dana 30 with 373's, i wont need a new carrier for when i get 410s right???