Cub Scouts need help with cooker

[snappy]

Our cub scout group does roasted corn at the Asheboro fall festival. We have a gentleman that is so kind to donate the use of his gass cooker(an old oil drum with dual doors etc etc). Well last year it leaked at every joint. Well fast foward and we redid the cooker, painted, new plumming, and new regulators. Well I got 6lb regulators not enough so we put 12lb ones on and now it only gets to 375* before it could get to 450 no prob but it it had adjustable regulators.

During the clean up I slightly bent the burner, a piece of 1.5 pipe with bandsaw slits for the burn and a section about 3 inches or so half cut out at the begining of the pipe. So hear it is.......ANYONE have or know where I could get a proper burner for this thing? We purchased new regulators like where on it but I think the bow in the burner is causing some issues. We tried to do the right thing and it has bit me in the hide in.....

Help NC4x4 the Fall festival is this Saturday and we are running out of time.

 

[kaiser715]

check out agrisupply on 70 www.agrisupply.com

Maybe along these lines?

http://www.agrisupply.com/burner/p/80524/&sid=&eid=/

edit: just checked online inventory on that one, closest in stock is in Greenville NC

I've always seen/used the slit pipe, but it is trial and error to get right.

 

[mommucked]

There are some single tube pig cooker burners for sale on Ebay also. Could you take out the bent one and build a copy of it??.

 

[redneckjeep87]

Of you need to you can borrow my tow behind pig cooker....its wood fired though....homebuilt but it cooks great
Edit....ive also used charcoal in it before w good results

 

[13bullets]

I know a guy that could build you a burner, but probably not in the time frame you need it.

 

[snappy]

We cranked the. Pressure reg and we fixed it