Custom exhaust builder parts

[rockcity]

anyone have a decent source for custom exhaust builder parts?

Dynomax has a good amount of builder parts but is limited and most people that carry Dynomax don't carry the builder parts.

I do have one good source but would like to entertain others.

Thanks

 

[shawn]

I ordered a couple of mandrel bends from summit. But you'd probably be better off going to a custom exhaust shop and having them make up a few bends for you. Probably cheaper that way.

 

[XJsavage]

X2 on the mandrel J bends. Between 4 J bends, a muffler and some 3" straight I have about $150 and 5 hrs of cussing invested lol.

 

[rockcity]

Most of the muffler shops I've tried don't really have the fit and finish or skill to do what I want. I'm sure there are some but I haven't found one yet and the exhaust needs to be built at the same time as the interior and sheet metal, hence the reason for DIY parts.

U and J bends are cheap and so are straights. I also need quick connection flanges because the exhaust reds to be in 3 or 4 pieces to get in it without pulling the engine, trans, and atlas

 

[DSM Turbos]

RJ muffler shop in raleigh has done some really nice custom stuff for a lot of the guys in Raleigh. He has a mandrel bender so he may be able to also just bend the stuff up that you need.

https://www.facebook.com/pages/RJs-custompiping/164892180202668

 

[taylor1]

I bought oxygen sensor down pipe flanges from RJs a while back. Nice guys to work with.

 

[Jody Treadway]

There's a dude who used to race an Orange MJ who is a Magnaflow dealer. Can't place his name but maybe you should see what Magnaflow offers that you may need...

 

[snappy]

I love my magna flows on my mustang. Way quiter than the wifes thruster on her 4.0 jeep

 

[WARRIORWELDING]

I'll also vote yes on Magna flows. Much better than FLOW junk.. I also loke the sound of AeroTurbine stuff. But those where on V10 stuff.

 

[ol'Jeeps]

anyone have a decent source for custom exhaust builder parts?
Thanks

Hooker and Stahl used to carry all the mandrel bent parts. Flanges, J's and U's etc

I have built several headers with their stuff.

What about other performance header companies?

 

[rockcity]

V flanges and clamps seem to be few and far between and pricey too!

I found most everything, just 2 more parts to order from another vendor.

Damn frustrating ordering exhaust parts from 3 different places because nobody has all of what I need.

 

[DSM Turbos]

Have you tried vibrant performance? Not 100% sure what you actually need but they have a lot of builder parts.

http://www.vibrantperformance.com/catalog/index.php?cPath=1022

 

[rockcity]

I did buy a lot of Vibrant parts

 

[Hokie_YJ]

Amazon has a lot of Vibrant stuff at pretty good prices.

 

[Rnuovrcj5]

Pro-Fabrication in Concord has everything you could imagine for exhaust bends.

 

[offroad cowboy]

Pro-Fabrication in Concord has everything you could imagine for exhaust bends.

Do they make systems? My dually desperately needs dual 3" pipes

 

[Hurley]

I cant believe Summit didn't have everything you needed?

if money's not an option:http://www.mandrel-bends.com/catalog/

 

[NC-V]

Pro-fab will build systems, expect to fork over some $$. They do very good work.

 

[rockcity]

Summit had most everything but not everything. Hard to find a dual 2.25" into a single 3" collector that will work. May have to fabricate it. Although Cone and Mandrel Bends do have options that may work