dana 60 steering question

Blacktoy

Blacktoy

Well-Known Member
Joined
Mar 21, 2005
Location
Raleigh
well i bought some 60s from yota wheeler. I am wondering if anyone knows if I will be able to use the sky hysteer arms that are on it. I will be running 5" lift leaf springs. I have been told I cannot run hysteer with leaves. BTW they will be under my 94 yota pickup.
 
who ever told you you cant run hysteer with leaves is smokin crack and should be smacked

but some leaf setups might require a 1" spacer to raise the arms over the leafs
 
it depends on how thick your leaf pack is, just measure the thickness of teh pack, then measure clearence between the spring pad and the bottom of the tie rod. this will tell you if your going to have clearence problems or not
 
Make sure you check frame clearance, too. You don't want the tie rod or drag link acting as a bump stop.

I'd say that "true" high-steer with the tie rod high is somewhat difficult to do with leaves, but whether or not it fits will come down to your truck's geometry.
 
Back
Top