DOM tube where to buy?

SFROMAN

Well-Known Member
Joined
Nov 11, 2008
Location
APEX, NC
I live in the general Raleigh area and I am having a hard time finding a company that sells sticks of DOM.
I need 1.75 x .120 wall x 20 foot to finish up a project and I don’t know who sells some.
I need 3 sticks for now and a sheet of 20 gauge
Where can I buy some? Ideally in and around Raleigh/ Durham but I have zero issue driving if you know of a place within a reasonable distance.

Thanks in advance
 
20ga go to dyllon supply.


Dom not sure. Metal supermarket had 1.5 120 wall for $1.42/inch. Roughly $17/ft..


We used to buy Dom from ryerson in Greensboro.
 
The closest place to Raleigh was Ryerson on the other side of Greensboro, last I checked. That was in 2020, and it was somewhere around $3.25/ft at a qty of 15 sticks of 1.75x.120 DOM.
SFROMAN said:
I live in the general Raleigh area and I am having a hard time finding a company that sells sticks of DOM.
I need 1.75 x .120 wall x 20 foot to finish up a project and I don’t know who sells some.
I need 3 sticks for now and a sheet of 20 gauge
Where can I buy some? Ideally in and around Raleigh/ Durham but I have zero issue driving if you know of a place within a reasonable distance.
Click to expand...
 
Check with fabco in Cary. Small welding shop, but will sell steel, might be a day or two delay if they don't have it in stock. They were always cheaper than dylon supply and didn't have a min length.
 
I think everyone is cheaper than dillon supply.

I think Ryerson or stock car steel was what the old shop used.
 
I'll check next week but I'm about to re-order for stock. I'm in Winston but can get you pricing on everything you need.
 
Back
Top