drill and tap HP44 knuckle needed

jeepin1995

jeepin1995

undecided......
Joined
Oct 21, 2006
Location
Cary (raleigh) nc
have a 8 lug HP44 with flat top knuckles..... need the passenger side drilled and tapped and studs installed for histeer arm..... who can do it??? i'm in hartsville, sc, but will send it out.....
possible the drivers side too if i can find just a drivers side arm.
 
Lots of great vendors on here can help.

I know Tony Casey @ Bull Gear Inc work is very good....

Jeepinmatt on here aka Triple M Engineering I hear does knuckle Mill and Tap Jobs
 
He's not local but does excellent work- Parts Mike. If you can get it locally great but if not I'd go to him. It will also ship in a flat rate box pretty cheap.
 
8379qtj10 said:
Lots of great vendors on here can help.

I know Tony Casey @ Bull Gear Inc work is very good....

Jeepinmatt on here aka Triple M Engineering I hear does knuckle Mill and Tap Jobs
Click to expand...
Thanks for the referral! Yes, I can handle it, and I've got some tooling I've been waiting to try out on one of these knuckles.
 
Back
Top