F450 Dana 80 REAR AXLE, 2005+, ford 10 lugs

Yay!Gurrr

Yay!Gurrr

Better Faster Stronger
Moderator
Joined
Mar 17, 2005
Location
N. N. Raleigh, NC
F450 Dana 80, Rear axle, 2005+, ford 10 lugs
Can be flood damage, broken gears, pinion, brakes, ujoiut flange, etc.
WMS-WMS ~75"
Pics showing me where / how the caliper mount [they are different]
.
.
May consider a brand name, full on, air setup...
 
Call F-Trucks in Denton, NC and see if he has one.

F-Trucks​

Address
188 Garner Rd, Denton, NC 27239, United States
Phone
  • +1 336 859 8211
 
I can be the flood damage, gears are striped out or brakes gone etc.
.
i think its something like this....
 

Attachments

  • image (7).png
    image (7).png
    627.9 KB · Views: 14
@Yay!Gurrr Called a bud in TN that knows his Ford shat... asking if he was sitting on one. He response [paraphrased]:

- Aside from OBS F-450s, which had D80s, but with a smaller 10-lug pattern than your "new" front axle...
- There are NO factory '05+ "F-450 D80s", as the 450/550 trucks all went to Dana S110/1S35

He said:
- what you're looking for is the '05+ E-450/550 which DID come factory with a D80 & big 10-lug pattern like your new front beam axle (guesstimated might be $5K due to rarity, unless you find a yard full of vans)
- or an S110/S135 to get the big 10-lug pattern and be prepared to rebuild the spring perches to fit the "van width" (which is all over the place vs std truck/CC frame widths) *much more reasonably priced than the above*
 
Last edited:
1999 and up 450 and 550 have different housings the 450 the housing has round tubes and the 550 housing has square tubes at least the trucks i have has the best i can remember.
 
Back
Top