Flipping a 10bolt

[bygkuntrey13]

Is there anyway that you can flip a PSD 10bolt to make it work on a DSD transfer case?! I have a 10/14bolt setup but need a DSD?! What all would I need to make it work

 

[foreman1063]

You can't flip it, the shafts will turn the wrong way with the same DS input. You Would either have to re-tube it, moving the pumpkin to the drivers side, replace it with a drivers drop 44 or replace it with something better matched to the rear 14 bolt, like a drivers drop 60. Might be better of finding a PSD transfer case.
Someone else may have some other options but that's what I have off the top of my head.

 

[wranglerrambler]

i agree john. The axle would be turning the wrong direction if you flip it

 

[wranglerrambler]

not to mention... wouldnt your ball joints, knuckles, etc. be upside down

 

[foreman1063]

not to mention... wouldnt your ball joints, knuckles, etc. be upside down

Absolutely.

 

[bygkuntrey13]

sounds good thats all i needed to know