ford 44 8 lug shafts interchangeable?

mmmkay325

Well-Known Member
Joined
Jul 16, 2005
Location
Waxhaw
Does any know if the ford 3/4ton 8lug d44 front shafts are interchangeable w/ chevy 3/4ton or 1/2ton shafts???
 
Nope...sure aren't. I can't remember the lengths, but there was almost 1" difference in the 2 shafts (Ford 3/4 ton and Chevy 3/4 ton that is)
 
Crash is right, they are not.
 
aight thanks that clears that up.....now are all ford d44's the same. 1/2ton vs. 3/4ton? or do they have different spline counts, lengths, etc. This would be for a full width d44 by the way.
 
Not the same either. The 3/4's are shorter I believe. Spline ct. should be the same.
 
appreciate it guys....

where's what one of the guys from Alloy USA emailed me....

Ford f250 3/4 ton d44 front axle:
Our kit part number is 12176. The long inner shaft is 34.75" and the short inner is 18.625". The outer shafts messure 9.72" long. All messurments are from the center of the u-joint hole to the end of the spline. The inners are 30 spline and the outer should be 19 spline.

Thanks guys for you help.
 
Back
Top