Freebies!! With VERY minimal effort.

Tacoma747

Tacoma747

Well-Known Member
Joined
Mar 20, 2005
Location
Winston-Salem
'Like' my Facebook page CBR MetalWorks for the chance to win free stuff.

1: 'Like' my Facebook page and once it gets to 100 'Likes' I will have a drawing for a box of misc gussets, tabs, brackets, etc. Will be worth $50 or so, shipping will be free to your door. (or $50 off any custom bumper)

2: After 200 'Likes' I will give away a swinging target (3-target style) or $100 off any bumper. Targets are good for most handguns, and .22's. Shipping will be FREE to your door.
I also have AR500 steel targets that will be available, winner can choose what they want.


If my FB page does not receive 100 likes by Thanksgiving, I will do the first drawing then so that somebody can have some fab stuff for Christmas

Thanks and good luck!!
 
Last edited:
I've got some leftovers from the gun show (go figure everything is not gun related that I have left). Check my FB page for prices (which are negotiable).

Deerhead cant be shipped, I will take $150 for it, it is 14g steel.
 

Attachments

  • 2012-08-26_20-05-51_370.jpg
    2012-08-26_20-05-51_370.jpg
    101.2 KB · Views: 205
  • 2012-08-26_20-02-06_245.jpg
    2012-08-26_20-02-06_245.jpg
    89.8 KB · Views: 204
Some silhouette targets and some walking targets, both out of 3/8" AR500. Come check them out at the Greensboro gun show this weekend! The holes in the silhouette targets will have 'flaps' that swing open when hit, they will automatically reset.

Walking targets can be shipped (unwelded) in flat-rate boxes.
$12 each for 1/4" mild steel
$20 each for 3/8" AR500
prices INCLUDE shipping

2012-10-08_13-11-32_820.jpg

2012-10-08_17-46-23_933.jpg
 
Out of sheer curiosity, how are you cutting the AR500?

FB page liked.
 
how much would a silhouette be?....and just some like 8 or 10in round targets
 
Liked
 
Cutting the AR500 with plasma, I am sure there will be a 'heat affected zone' that is a little weaker, i will do some testjng Thursday with a .300 OSSM and see how they handle it.

Silhouette's will be $220 with the flap doors, I have a few that didn't cut quite right that I will sell alot cheaper ($175). They still look the same just might have a slightly mis-cut edge on part of them. The one pictured above is a 'blem'.
 
Ended up using a .308, no damage at all even shooting from alot closer than you should (about 50 yards).

Some more targets below that I have leftover from the gun show. (bottom 3 on the right are 'blems', PM for pricing).

X-Large ~14" $75
Large ~10" $50
Medium ~8" $40
Small ~6" $20

All are 3/8" AR500

Any of them smaller than the X-Large will fit in flat-rate boxes.

I can work on the price a fair amount if you buy 4 or more.

alh3.googleusercontent.com__P4jWtGnAWQM_UH3rIMoZG3I_AAAAAAAAAmae7848a7078c4665738f1b33090867fe.jpg
 
98
 
Back
Top