DieselToyPullr
Well-Known Member
- Joined
- Oct 20, 2015
- Location
- Charlotte
Garage clean out. As title says, 1st gen yota parts and some parts from a 95 chevy dually pickup I had. Dually was a 6.5 turbo diesel with sas dana 60 front and np205 t-case. Parts should align with such. Stuff is listed best of my knowledge, so ask questions as necessary. Prices are overly, incredibly negotiable... so any offer will be considered. Free .99 may not be unreasonable. Located in north Charlotte. Possibly could ship on your dime.
1.
4.30 gearing
$65
2.
Springs R used UF. Scrap
$0.01
Housing, knuckle ball boogered up. Scrap.
$0.01
3.
Rear axle shafts, maybe 3rd gen...not sure
$50
4.
New, never used shortside birf. Pretty sure TG dirty 30 or longfield. Can count later.
$50
5.
Two sets of stock knuckles, 7 TG studs in one I think. May also be clearanced for the bigger birfs.
$75 for both, or $40 each pair.
6.
Tie rod from dana 60 setup, push/pull steering if I recall correctly. New TREs.
Tie rod or drag link, I think cut for a samurai setup. Threaded for yota TREs.
$25 each.
7.
NIB, chromoly hub gears.
$75
8.
Brake pads - GNAD785s full new sets.
$15
GNAD974As half new set.
5 dollra
9.
TG hi steer arms.
$40
New yota master cylinder
$35
10.
3rd Carrier only.
$15
11.
Moose? gas tank - no spout.
Battery box, mounting flanges inside.
$10 each.
12.
6.5 td PSD external mount setup.
$50
1.
4.30 gearing
$65
2.
Springs R used UF. Scrap
$0.01
Housing, knuckle ball boogered up. Scrap.
$0.01
3.
Rear axle shafts, maybe 3rd gen...not sure
$50
4.
New, never used shortside birf. Pretty sure TG dirty 30 or longfield. Can count later.
$50
5.
Two sets of stock knuckles, 7 TG studs in one I think. May also be clearanced for the bigger birfs.
$75 for both, or $40 each pair.
6.
Tie rod from dana 60 setup, push/pull steering if I recall correctly. New TREs.
Tie rod or drag link, I think cut for a samurai setup. Threaded for yota TREs.
$25 each.
7.
NIB, chromoly hub gears.
$75
8.
Brake pads - GNAD785s full new sets.
$15
GNAD974As half new set.
5 dollra
9.
TG hi steer arms.
$40
New yota master cylinder
$35
10.
3rd Carrier only.
$15
11.
Moose? gas tank - no spout.
Battery box, mounting flanges inside.
$10 each.
12.
6.5 td PSD external mount setup.
$50