guys running the 36x13.50x15 iroks

I run 15x8's on 36x13.5 iroks on my jeep. I generally run 35" AT's, but when I do run the Iroks, the only problem is that they are louder and wear fast. I bought some 15x10's to put on because they were a good price, but I haven't seen the need to put them on yet.
 
they are gonna wear fairly fast (relative to most tires) on any wheel... thats just the price of running swampers on the street
 
i have a set of 36x13.50 iroks on 15x10's the seem to wear better, and really give the tire a wider stance, ive also ran them on 8's and didn't really like how they looked and performed in comparison to the the 10's, hope that helped
 
I'm also running them on 10" wheels. I don't do much pavement pounding but I have put a good bit of wear on them since installing them this past winter.
 
running them on 15x8...

with proper inflation, they wear just fine...

radials and bias will obviously wear slightly different, and you didn't specify in your post...mine are the radials...

Greg
 
im running 36x12.5x16 TSL Radials for my street tires, I don't have much street use on them but they run fine to 65mph with no ballancing. People claim to get 30-40k on them so I wen't with them.. They were priced good too..
 
Here's the deal. At Galloways there is a used set about %85 left on the tires. With my 35x12.5 BFG muds as trades, which are about %65, he gave me the price of $300 including labor. I'm just not sure if they're gonna wear a helluva lot faster than the BF's. But it seems like a good deal. And honestly i'm not sure if they're bias or radial. . He also has a set of 36x12.5 TSL radials he quoted me $150 for.
 
They will wear faster. Mine have well under 5k on them and are nearing half tread.
 
Back
Top