HELP! need to know what kind of axles i have

krehel24

krehel24

<- and it begins!!!......
Joined
Mar 21, 2005
Location
Locust NC
ok so I pulled the covers off and this is what is stamped on the ring gear

FRONT: 1 26 77 dana 30060 A A3012 43-14 182 (cover has 10 holes)

REAR: (I know this is a GM) 2 CP 1235124 15 44 10 85 (cover has 10 holes)

My goal is this, the front is good going to leave it ,the rear is bad, but fixable, but is it worth it? is there somthing out there that would be better?

This is on a scoutt i just got going with 35s not crazy wheeling kid will be in there with me. any help would be GREAT!!
 
rear end

I thought the rear was a GM because the bearing cap was stamped GM
 

Attachments

  • 09-24-2009 014.jpg
    09-24-2009 014.jpg
    83.7 KB · Views: 231
  • 09-24-2009 015.jpg
    09-24-2009 015.jpg
    71.9 KB · Views: 236
The front is a Dana 44 from a Chevy,FSJ,Scout application.The rear,according to the cover,looks like some kind of a car 10 bolt.
 
so what would be good to put in the rear? I can i know for sure what gears are in the front?
 
krehel24 said:
so what would be good to put in the rear? I can i know for sure what gears are in the front?
Click to expand...
count ring and pinion teeth and divide.
Fool proof
 
I would probably just put a 6 lug Dana 44 rear out of a fullsize Jeep in it.They will hold up to 35's pretty good but you will need to regear both of them.
 
front and rear is 6 lug, i pulled the engine out the other day. a friend of mines old project.
 
ok so the front is a Dana 44 with 307 gears, today i got a 12 bolt with 307 gears not sure how that will work with 35s and a 345 v8, but i will try it and if i hate it i will regear it. I realy dont like the "traditional" trakbar so i was thinking can i do like a 4link is on the top? center of the diff and angle back to the frame with hims and .120 dom or hbew somthing like that? thanks
 
Back
Top