How to fit bigger than 35's

tacomatrd00

tacomatrd00

Well-Known Member
Joined
Nov 13, 2005
Location
Lancaster, SC
I have a 2000 tacoma and I am wanting to go bigger tires like the 37x13x15 boggers. I have the 35 SSR's now and they fit in the fenders tall wise but not width. When I stuff my rear the front of the tire hits the fender flare, Do the bushwacker cut outs let you get that extra space or do you just have to cut them. I am planning on going bigger tires after the SAS and it will have 8" suspension lift and 3" body. :bounce2:
 
the bushwackers should give you just enough clearance and once you do a sas and add 2" more to your suspension you should be sittin nice
 
if you are opposed to cutting fenders then those wont help, but if you cut the fenders then install them they will give you more clearance.


I personally think they are a waste and i dont think we have fender coverage laws in NC so if i were you i would cut them until the tires fit and then see if you like it

if you really just think it is that ugly, then buy the cut-out flares
 
I think the dents from flopping it (because its too tall) will look worse than cutting the fenders! :flipoff2: Keep it LOW.
 
throw the flares away and do a sas
 
I am going to have full size axles so I think the width of them will help me not flop hopefully.
 
well if you are getting full size axles then you can keep the amount of lift you have an run 37's
 
Ok now that we have that input what size is all the tacoma guys running and how much lift?
 
Back
Top