How to make a GM auto trans passenger side drop

[benXJ]

I have a 2wheel drive 2002 5.3 and 4l60 trans ready to go into my M715. It runs great.

I have the stock NP200 tcase, which is a divoreced setup.....what I had planned to use.

However, the NP200 is a 'limiting factor' in the truck...makes alot of noise and gets hot....not that big of a deal, but exploring options while everything is out.

I want to keep the engine and trans I have...its a known quantity.

How can I make it 4wd with passenger drop tcase?

-Jeep/scout divorced np205....rare
-Swap the 2wd tailshaft and get a passenger drop tcase to mate? which one?
-I have a passenger drop dana 20 tcase, but only see adapters for non-computer controlled 700r4 and 4l60s
-?

Ideas?

Thanks

 

[Mac5005]

4wd tail housing on the trans and np 208, np 241 etc or d300 and change the 300 Input to match the Chevy output.

 

[Shreddinlettuce]

Step 1 buy an advanced adapters super short 4l60 adapter. Step 2 put Chevy np241 or atlas behind it. The atlas adapter pattern is same as np231/241

You do have to rebuild the trans and use the output shaft that comes with the adapter