hp power steering hose help

Old_Red01

Old_Red01

Member
Joined
Jun 8, 2010
Location
Thomasville NC
so i had to make one to get by for now and it keeps blowing it off so could anyone help me fix it right or maybe tell me where i could have it fixed around thomasville im low on funds so need something cheap lol i have a 350 in my jeep but still have jeep steering box so both the ends are not the same so cant just buy a new hose... any ideas?
 
Old_Red01 said:
so i had to make one to get by for now and it keeps blowing it off so could anyone help me fix it right or maybe tell me where i could have it fixed around thomasville im low on funds so need something cheap lol i have a 350 in my jeep but still have jeep steering box so both the ends are not the same so cant just buy a new hose... any ideas?
Click to expand...

NOT in T'ville, but Alliance Hose in GSO off Industrial (Randleman Rd)... about 15-20 minutes up I-85
 
ON the cheap, if you have an end that will fit on either side, which since it sounds like you do, a lot of NAPA auto PArt stores can make hoses. Take the two ends in and allow a little extra length and have one made. I did this on my old Jeep and it out lasted about everything else that had been done to it.
otherwise, from what I have heard, Alliance can make great hoses! still though, take both ends with you so they know exactly what you need.
 
Another suggestion for until its fixed, sounds like you're using rubber hose and clamps. If you're using regular hose clamps, ditch them.. They are worthless for holding any kind of pressure, you can buy fuel injection clamps at the parts store for a couple bucks and they will hold a lot better.
 
Back
Top