I seen a thread about a guy making these...

-=whitetrash=-

Member
Joined
Sep 27, 2008
Location
kernersville
aight i got a traction bar for my honda and the hime joint are bad and the rods are striped out.

so what i need is some one that can make the arms with himes on each end just like the one's i have ill post a pic up if what i got ,

they are 13 5/8 long

here what i got if you could pm me or post in here the price you would charge to do it, would like to have it done asap, thanks to any one that can help

89si061003.jpg


89si061002.jpg


89si061001.jpg
 
why don't you make it yourself? start browsing colemanracing.com - you can find the trailing arm tubing pre-tapped there.. 4 heims with a 9/16" bolt hole, 4 jam nuts, and you're done.
 
Rich said:
why don't you make it yourself? start browsing colemanracing.com - you can find the trailing arm tubing pre-tapped there.. 4 heims with a 9/16" bolt hole, 4 jam nuts, and you're done.
Click to expand...


my cousin is buyin this from me he said he will pay for it , so in that case i would rather help someone out from the site. put a little cash in some one else's pocket.
 
Whitetrash - are you the one responsible for making the first iteration of this abortion?
 
Back
Top