Late model intake swap in a XJ

rob92xj

Member
Joined
May 8, 2005
Location
fayetteville, nc
For anyone who has swapped the 99 and later intake into a XJ what drive belt are you guys using? I have about 10 belts and none of them fit the original belt is way too long and every other is too short I don't have numbers or anything as they are all used.
 
I found a belt that worked it is still a little on the short side. For reference it is a Gates K060938 it is about 1/2-1" too short, but can be fitted on.
 
rob92xj said:
I found a belt that worked it is still a little on the short side. For reference it is a Gates K060938 it is about 1/2-1" too short, but can be fitted on.
Click to expand...

How where the gains for this swap?
 
snakester14 said:
How where the gains for this swap?
Click to expand...
So far the throttle response has improved alot, but I cannot really compare it yet as it is still raining, anything past 1/4 throttle right now and the XJ is getting sideways alot of it has to do with the stroker too.
 
Back
Top