Links and Rod Ends for Rockwells

[ramitall2]

I’m looking for suggestions on what to make my links out of for a full-size truck on rocks, and also any suggestions on rod ends for the links, I will be running four link front and rear with either trapped coils or coilovers and some big bump stops to limit up travel. For a size reff, the truck is a 2000 dodge 1500 ex-cab with about 3 feet cut out of the rear frame and lots of tub to come.

 

[RufusTheRam]

i've got sch. 80 lowers and sch. 40 uppers. 1.5". RE superflex joints at the frame, bushings at the axle. if i happen to bend the lowers, i'll just put a piece of angle iron on the bottom. i chose pipe for cost and availability. bgreen over on pirate4x4 runs sch. 80 lowers also on a fullsize chevy cab truck with a 502 caddy and hasn't had any strength issues.