Lock right locker

TMJK48

Guest
Hey, just wanting to ask if anyone if knows if there is a drop in lock right for a jk Dana 44 rear/ stock carrier/ non rubicon? This is a DD, so I'll have to do this in one day.


Sent from my iPhone using Tapatalk
 
+1 for talking to Stephen or Curtis at ECGS!

Do remember a few of our guys with JK's saying you have to use a selectable locker though, as the JK TCU/ECU can tell when a locker is used and can put the transmission in limp mode. Or something along those lines. Do some reading to confirm, but I know one of our guys chose to get a Detroit limited slip instead.
 
The internal case dimensions of a JK 44 are different then a standard 44 so their is currently no drop in locker for JK Rears. Aussie locker says they are going to do one but I have not seen one yet. Aussie does do one for the front JK carrier as those are different also, however when you regear you would typically install the old style Dana 30 carrier and it would except the standard D30 locker PT2210. In short if you have 3.21 gears I would not recommend putting the JKD30 Aussie up front as it will not install in the new case you will need, to go from 3.73 or numerically higher gears. You can install a standard 44 Case and locker in your jk housing. You just need a 3 series Dana 44 carrier or locker.
 
Back
Top