Judge
Eric
- Joined
- Jun 12, 2012
- Location
- Huntersville
I'm in the process of putting my xfer case pbrake setup together and ran into a snag.
I'm running a fixed 1350 yoke on the rear output and have a rotor from TSM that mounts on the backside of the yoke. My problem is that the u-bolts aren't long enough to capture the rotor and the nuts/lock washers.
does anybody know if someone makes/sells longer u-bolts?
thanks in advance,
eric
I'm running a fixed 1350 yoke on the rear output and have a rotor from TSM that mounts on the backside of the yoke. My problem is that the u-bolts aren't long enough to capture the rotor and the nuts/lock washers.
does anybody know if someone makes/sells longer u-bolts?
thanks in advance,
eric