Reply to thread

Message: <blockquote data-quote="Brownsxj" data-source="post: 1886601" data-attributes="member: 6510">First photo was new lines with new o rings that I had made from Napa.  It is the drivers side.  I tried to delete the adapter fittings and went to a “straight hose to ram” connection.  One less connection in the line.  I used red lock tight to see if it would help.  If it worked, then I was going to to the same on the passenger side.  The drivers side still blew out.  It blows out no matter what fittings are used.  I will look into the pump next.</blockquote>