Measure your trailer for me please.

[Will Carter]

Hi.

I'm making a thing.

If you have a trailer with stake pocket mounts could you measure them for me? Trying to see how many bastard sizes I can find out there.

Would like to know the internal width and depth and the total height.

Like the picture (except internal).

For your help you can have a discount on the thing I'm making. Although it might take a month or 12 to show you.

Thanks.

 

[obullfish]

Hi.

I'm making a thing.

If you have a trailer with stake pocket mounts could you measure them for me? Trying to see how many bastard sizes I can find out there.

Would like to know the internal width and depth and the total height.

Like the picture (except internal).

For your help you can have a discount on the thing I'm making. Although it might take a month or 12 to show you.

Thanks.

I’ve got 4 trailers with pockets manufactured by 3 different companies. Give me a day or two and I’ll send dimensions.

 

[braxton357]

A lot of trailers use formed stake pockets made to fit 2x4s, some use pieces of channel iron.. the dimensions might be the same but the corner radius and taper of the legs will be a lot different

 

[jeepinmatt]

1-5/8" by 3-3/4" and 3" tall, with about a 3/8" corner radius.

 

[NickMaul]

1-5/8" by 3-3/4" and 3" tall, with about a 3/8" corner radius.

Half expected you to report these dimensions in metric units

 

[awheelterd]

Half expected you to report these dimensions in metric units

That would be so bud light

 

[Croatan_Kid]

We definitely prefer American freedom units

 

[getstucksome]

1 5/16" depth, 2 3/4" height, width starting at 3 5/16" and tapering to 3 1/4" before the radius

 

[Caver Dave]

some use pieces of channel iron..

Read: Hudson Brothers...
*as an afterthought* let's weld chunks of channel vertically inside the frame channel (just NOT where they'll do any good) and then let the old/blind/palsied guy cut the tops out with a woefully undersized tip