MJ one ton turning radius

Scott86MJ said:
A 6” bolt and a wagoneer pitman arm has solved my turning radius issues. Now I have to delete my sway bar mount (touching drag link) and figure out what to do about my track bar angle
View attachment 445415
Click to expand...

Hard to tell in the picture but it looks like you have a hole left in the track bar bracket to move the axle end up some. What about the frame end? Any room to move it down?
 
Hokie_YJ said:
Hard to tell in the picture but it looks like you have a hole left in the track bar bracket to move the axle end up some. What about the frame end? Any room to move it down?
Click to expand...
Yes, I have one hole left, on the frame side I will need to replace the track bar mount. I have it on the second hole and I cut the extra part off so it wouldn't contact the sway bar mount when flexing. Well now I'm definitely not running a sway bar so I'm going to redo the track bar mount and try to use a lower hole. I have an extra one. Only other thing I was thinking is go to 3 link and weld a new track bar mount beside the coil spring on top of the axle.
 
Back
Top