motobilt
Well-Known Member
- Joined
- Jul 25, 2013
- Location
- Dothan, AL
Motobilt Welding Square
The Motobilt Welding Square is CNC Laser cut out of 3/16" high strength steel. It measures 12" x 12" x 17" and is 4" wide. Holes are 1/2" and hole spacing is 2" on center. Slots are 1/2" as well. Could be bolted down sideways to a table, used as a fixture on a welding table, laid down flat and used as a 4" tall block and has unlimited other uses. Ships bare metal and in five pieces. DIY kit must be tacked together.
The Motobilt Welding Square is CNC Laser cut out of 3/16" high strength steel. It measures 12" x 12" x 17" and is 4" wide. Holes are 1/2" and hole spacing is 2" on center. Slots are 1/2" as well. Could be bolted down sideways to a table, used as a fixture on a welding table, laid down flat and used as a 4" tall block and has unlimited other uses. Ships bare metal and in five pieces. DIY kit must be tacked together.