my ass is popping

devlsh1

Active Member
Joined
Jan 10, 2007
Location
High Point NC
I put a 96 Explorer 8.8 in my 99 Wrangler about 4 months ago, everything seemed fine. I went to URE last weekend, now when I back up and turn the drivers side of my axle makes a clunk. I dont notice it any issues any other time.......where to start???
Thanks
 
Coming from the front or the back axle? 5spd?
 
Definatly ask this question on as many forums as possible, that should probably fix the problem

or...

How about grabbing the driveshaft and trying to twist it to check the u joints and pinion, and then i would removed the diff cover to look at spider gears. Or first jack the wheels up and try to move them to see if there's any play in the bearings

Sometimes the questions on here boggle my mind
 
How many forums should I post on to make it be fixed funny guy???? I will check the u-joints/drive shaft for play
It is the rear axle that is popping.
If it was u-joints, shouldnt I get something going forward and reverse? I have a feeling its probably the stock LSD carrier, but wanted other opinions before I go digging too far.
Thanks
 
spider gearss
 
Clips have spun on??? elaberate please...the cluthces in the limited slip? I have pulled the carrier before, but i'm not exactly familiar with everything.
Thanks
 
Loosk like its the bushings in my stock trac bar...ordered new RE adjustable trac bar.
Thanks for your help.
 
sha_ba_do_bang said:
Definatly ask this question on as many forums as possible, that should probably fix the problem

or...

How about grabbing the driveshaft and trying to twist it to check the u joints and pinion, and then i would removed the diff cover to look at spider gears. Or first jack the wheels up and try to move them to see if there's any play in the bearings

Sometimes the questions on here boggle my mind
Click to expand...


Gotta love a smartass.. then again, i see on sha_ba_do_bang's other posts the work he's done hasnt always been up to par..
 
Back
Top