need help asap, anyone got a busted selectro hub?

kaiser715

kaiser715

Doing hard time
Joined
Jun 1, 2006
Location
7, Pocket, NC
Trying to get ready for a trip next week, and trying to finish up a long project. Somewhere along the way, I have lost the 3 set screws from one of my Selectro Classic locking hubs.

Part #11 here: http://dl.dropboxusercontent.com/u/17720416/Selectro/Install2&3.jpg

Anybody have a busted selectro that I can get the set screws out of? Local industrial supply doesn't have anything that will work without some modification.
 
Sorry, left that out. Mine is on a Dana 30. Wonder if it's the same across all of them?

The screw has a head that fits into the a pocket in the outer knob/handle. the other end of the screw is threadless for maybe 1/8+ inch, that rides in a groove cut in the body of the hub.

I thought about getting something close and filing the threads down, but the head was too big....guess I could file that down, too.
 
Off the top of my head, I think they're pretty similar. I've got a Dodge 60 out in the shop I'm putting together and I noticed those special screws too and really hoped I didn't lose any of them!
 
Confounds me where I put these 3 --- every other single part was organized and where it should be, including the 3 screws from the other hub.

I picked up some set screws today from a different supply house. Gotta trim a little from the length, and file the threads off the end...should work.
 
Back
Top