Need info on ubolts for d60/14bff for k5 etc

andybritt2002

Active Member
Joined
Jul 30, 2008
Location
Chesapeake, Va
hey just recently got some 1tons but a lot of the mounting parts on em were plasma cut off. Im trying to bolt everything under a 84 K5 that used to have 10 bolts. I have called around and dont know of any local places that have Ubolts etc without ordering online. Where do you guys get ur Ubolts online? Also on the 60 looks like theres 2 studded threads I need to back out is that right? comes out of the housing. also would I need new ubolt plates that go on top of spring? Any help would be greatly appreciated, these are kingpin and I have not converted to any cross over steer yet. Any info on anything id need to complete this project would be greatly appreciated
 
Get hold of Kert at DIY4X.com. He can get you everything you need for a great price. I've ordered all of my last spring plates and ubolts from him. Stout stuff to say the least. You can call superlift direct and get ubolts for whatever you need. I did that the first go around but I don't think they sell spring plates. I could be wrong. You can also try your local machine shops or drive shaft shops and they may be able to get you your ubolts and whatever else you need. :Rockon:
 
andybritt2002 said:
thanks, just shot Kert an email. is 1 of the Ubolts on the 60 just threads that screw in then a nut on top?
Click to expand...

Yeah they are just studs. Hey may be able to hook you up with them also. I didn't need new studs for mine. Some people use a grade 8 bolt but you have to make sure if you use a bolt to be certain you have plenty of threads in the axle when you torque it down.

Kert is usually pretty busy so if you don't get an email just give him a call and he'll be more than happy to help you out.
 
Back
Top