Need steel Tube/plate/etc (Raleigh + surrounding) ?

jmg4runner

New Member
Joined
Mar 22, 2005
Location
Raleigh
I'm placing an order for link and cage material in december and am offering to add on anyone that would like to.
What I'm getting

1.75 x 0.375 wall DOM , ~$12.50/ft, 20 ft sticks
- i need ~ 10-11 ft of the stick so the remainder will be up for sale after I'm done
- edit : now going to go with 2.00 OD, .375 wall and do weld in adapters for the 1inch shank rod ends instead. I overlooked the fact that you cannot cut a 1inch thread into a 1inch ID hole. Cost is $14.50/ft.

1.50 x 0.250 wall DOM, ~ $9.75/ft, 20 ft sticks
- again i need between 10 and 11 ft, rest is spoken for by vanguard
- doing 3/4 shank rod ends for the uppers with weld in adapters for the threads

1.75 x 0.120 wall DOM, $3.75/ft, 20 ft sticks
- I'm planning on at least 5 sticks for an exo

Those prices include delivery to Raleigh

They also have plate/bar/angle/etc. Check out the website. http://www.bmgmetals.com/

If you want to add onto my order and pick it up from my house in Raleigh respond here AND send me a PM with your PERSONAL CELL PHONE NUMBER, and I will call and discuss the details with you. I will need the money BEFORE i place the order on or about December 3-4.


Other interested parties:


lxlmariuslxl:
2+ sticks 1.75 x .120 wall tube

vanguard:
1/2 stick of 1.50 x .250 wall tube
 
for anyone that wants plate/angle etc please call them and find out their minimum order qty and cost and post it up here. I talked to them today and their supplier delivers every Tuesday and they need a 1 week lead time, so delivery would be the middle of the following week.
 
i'd be down for buying the rest of that link tube from you if i dont find a solution sooner

either way i'll be in for at least

2 sticks of 1 3/4 .120 wall

2 sticks of 1 1/2 .120 wall
 
looking around that 1.75x.120 wall price looks really good, i hope i wrote that down right when talking to the guy :huggy:
 
updated the first thread, I'm busy tonight but will give you two guys a call in the next day or two to sure up plans and figure out money.

fourwheelin49r, you mind PM'ing me your phone # so i have a way to get in touch with you?


What do you guys think about 100ft for tubing for an exo on a toyota, i figured it was enough to have some "mistake" bends since its my first time bending. Who's done them a couple times, and about how much tube did it take ?
 
I didn't ask since I wasn't getting any. The phone number is on their website, or i'll call later this week. I'd imagine almost identical to the 1.75 x .120, like within $0.50/ft
 
bump for those interested in steel

I called and left messages with those that got up with me so far. The guy I talked to said if we get into the 10 stick range on the 1.75 x .120 he might be able to do a slightly lower price depending on qty.
 
calling in the order this coming monday so let me know if you need something ASAP. For common tubing like the 1.75 .120 wall I can go without a deposit for orders 2 sticks or less but for any crazy stuff or large requests I need money before I buy the steel.
 
Back
Top