One ton pitman arm for a CJ?

spraypaintman

spraypaintman

Well-Known Member
Joined
Mar 21, 2005
Location
Kernersville
Any body know of a beefier pitman arm that will fit on a CJ? It needs to be flat with no drop in it & about 7.5" long. I know Sam's Offroad makes some but was hoping for a lesser expensive junkyard alternative. I need to be able to drill it out to accept the 7/8" TRE's. My stock pitman doesn't have enough material on the end to drill it out and keep its structural integrity.

Noah
 
I used a Waggy pitman and had it reamed... I don't think Jeepeater is gonna need it, ya want it?

It's 7" long, center to center. I'm gonna be heading to W-S this week...
 
Is it flat without any drop to it? I have a stock waggy arm and it didn't work out. It needs to be flat.
 
it may have 1/2" drop in it total, but it's basically flat...
 
Here's the one I have & it drops a little. Probably the same as yours. I tried using this one but it took my drag link down too far.

628d8f48.jpg
 
Yeah, that looks like it.

I don't think there are any ones that don't need to be reamed.. IIRC, 70's cars has some flat ones, Camaro comes to mind?
 
Thanks Rich I'll look into that. Here's the blinging one from SamsOffroad.

Copy_of_PittmanArm.jpg
 
Back
Top