Post the items you are bringing to the Swap Meet this weekend.

[Yay!Gurrr]

Post up the items your bringing to the swap meet... (or if you just want to say your going)

Take the chit chat stuff to PMs so this is just posts of the junk that will be there


Swap meet link/info:

http://www.nc4x4.com/forums/showthread.php?t=10938

 

[trailjeepman]

I will be there with alot of CJ stuff

 

[andysleds]

some stock Yj stuff - air box, tire and carrier. misc brackets

 

[trailjeepman]

Oh yea! I will have an 8.8 there too! Out of 97 Explorer.....3.73 gears

 

[sam(slim)]

Three aluminum wheels for a superduty and some 5 point belts.

Sam(slim)

 

[amcjeepman]

Running AMC 360, XJ dana 44, later GW centered 44, Semi float D60,
Custom wide trac width CJ front Dana 44, wheels, p/s for a CJ, 3 1/2 - 4 " lift coils for full size ford,CJ bumpers, hoods grills, fenders. D44 flat top knuckles, CJ HD steering shaft.
Whatever else I have time to load.

 

[jeepn-jason]

I have some 4" BDS springs for a cj I could bring if anyone is interested. Also I have 2 33" Bias Baja Claws with about 40% tread I could bring. I dont really want to carry them unless someone is interested though.

 

[78broncoboy]

hey guys, im new to this board, and i was wondering where the swap meet is... i would be interested to go, just to meet yall guys, and to see whats going on with yall. i wheel a 78 bronco, slightly modified, but im a poor student!

 

[1BIGAZZBURBN]

im bringing 36'' tires, 15x8 rockcrawler wheels 5 on 4 1/2 bolt pattern, matching 60 and 70 with 4.56 gears, cj rollbar, stock yj springs and other stuff. Added stuff-----Centerforce Clutch for a 4.0, 15x10 white wagons 5on5 1/2, 1 h-1 8 bolt wheel,5 on 4 1/2 wheel spacers

 

[crawlinjp]

couple ford 9", set of rockwells, haven't decided on what else.

What are people looking for? I have a pile of cj d30's, and misc piles of parts, but I'm not loading them all up just to bring them back home again.

 

[Rob]

I need a diff cover for a 8.25" XJ rear axle.

 

[/dev/ram]

I can bring the M416 trailer axle, spare bearings, wheels, tires, hand brake again if there's interest. I'd really like to unload it if I'm going to haul it - so let me know if you're serious..

 

[crawlinjp]

I'll also have a set of (4) 36" sx's on beadlocks, 5x5.5

 

[andysleds]

if anyone is looking to dump some 35's-37's let me know. I need some. Also can possibly make trades. Pm me

 

[ALLIANCE HTW]

Is anyone bringing some lift parts for a 91 XJ?

 

[ajeeperwannabe]

Any XJ Parts at all??

 

[sam(slim)]

Any XJ Parts at all??

What do you need?

 

[powerstroken]

would anyone be interested in any sammy, kick/track parts

 

[Ricky B]

I'll be lookin for a set of 5 on 4.5 black steelies 15x10 or 15x8's maybe if the price is right

 

[justjeepin86]

I will be bringing a bunch of misc. engine accessories from a yj and a xj.
A couple sets of wheels, new 16" tires(225-75-16), some cj stuff(tire carrier + reciever, bellhousing for t-5 w-clutch flywheel), AW-4 tranny, 21 spl. 231, 205 tc, lift blocks, yota springs etc.

 

[Tom@Hilltop_Machine]

(5)35" tires and rims, (2) MRT 15x10 beadlock rims, CJ hangers, shackles, Dual electric fans. SBC alum intake and 670 cfm edlebrock carb, Dana 44 front axle, Dana 60 FF rear, AMC motor mounts, oil coolers, york compressor, ramsey winch remote, and other nik naks........

 

[Yay!Gurrr]

im on my way... bringing nothing and planning to buy nothing. But will be continuing onto Morganton to chips place to pick up a part if someone needs anything hauled (in my p/u) call me 919-606-1152 -mike