project SAMI

[quickracer]

This is UNDERTAKERS Sami.Already has a locker in the rear,gear unknown?Someone put some sort of lift in it with 31 inch meats.Im throwing together an EXO cage so he can go beat the daylights out of it.

Is there any cheap upgrades i/we should know?I guess a spring over would be a cheap way to go? Any info would be good.I wheeled it in the woods behind the house and discovered it could use a lower low range.

 

[JUSTIN HARTNESS]

yea

put that body on a yota frame and then you'll be ready

 

[quickracer]

put that body on a yota frame and then you'll be ready

with a 4.3 and some rocks..SWEET!!

 

[JUSTIN HARTNESS]

no

no no lc eng... 22r and toy axles with longs and just a few other goodies

 

[quickracer]

started some cagework earlier today.

still more to be added.

 

[undertaker]

thank you

jim i just wanted to thank you for all the help and hard work. It is really coming together and I cant wait to go try it out and try to keep it on all four and not on the cage.

thanks
undertaker

 

[paradisePWoffrd]

looking good so far...

as for suspension... do a spring over with toyota axles, and gears in the axles and/or tcase...

 

[CTRaceWorx]

If you want to keep it on the cheap then put some 6.5:1 TG in the case and that will keep you out of the axles.

 

[mosh5186]

how well does that work? Does it mess with the road mpg?

 

[quickracer]

done with the cage,
time for another project...toy axle buggy...........

[/IMG]

 

[quickracer]

 

[CTRaceWorx]

The 6.5:1 works very well for the money, the high range moves from 1:1 to 1.7:1 giving a 20% reduction. With stock sammi gears it will run 31-32 fine. If you run yota axles with 4.30 and 33-35" tires you won't have to gear unless the motor is weaker than normal. I have them on my site for $474, yet me know if I can help you guys out.

 

[quickracer]

ok thanks,i will send the useful info to the undertaker and he can take it from here,thanks for all the great input.