question about cherokee parts

burley

New Member
Joined
May 31, 2005
Location
Wilmington
I was driving down the road and got serious death wobble at around 60... just noticed the 6" arms with bushings coming off the sway bar, aren't connected... those 6" arms with bushings are the tie rod ends correct? I need to order sme and was also wondering if there was aftermarket applications available?
 
if they are coming off the end of the sway bar, theyre the swaybar end-links, or most people but in disconnects, so that the swaybar can be taken loose offroad to give more flex....

whether this will cause the death wobble or not, i dunno... but it will cause the jeep to roll alot more in the corners
 
shouldnt cause death wobble, i keep mine disconnected most of the time

i would be checking alignment first off(not with a tape measure) and go from there

could also be worn tie rod ends or ball joints, or really any other front end part


i know the only time i got bad death wobble was when my adjustable control arms were way too tong at forst, screwing up my caster
 
Bad experience and a car accident happened to me with your same situation... I was driving alone going home and suddenly I noticed that the 6" arm aren't connected and I was very nervous that moment. A lesson that I will never forget in my entire life is to always check my Jeep aftermarket parts for a safer driving. So for you Burley, I only advise to check always your aftermarket parts and your Jeep Cherokee Part.
Hope this may help you. Goodluck Burley!
 
Back
Top