Random pic thread.

silver cj-7 said:
This is how I want my jeep to get "Ducked"View attachment 441819
Click to expand...
Surely you've seen these?

fakewrenching.com

No ducks decal

4x4 Please apply on clean surface in 70 degrees. Avoid Power Washing. Make sure the surface is clean before applying. All sales are final Shipping Disclaimer: If you choose Standard Mail (No Tracking or Insurance), you agree that FakeWrenching is not responsible for lost, delayed, or damaged...
fakewrenching.com
 
FB_IMG_1752693288975.jpg

Screenshot_20250716_151608_Facebook.jpg


From the Pensacola Beach air show last week.

Duane
 
Loudmouthbass said:
ummm, if he's holding / using the Canon RF 600mm Prime Lens, what is the camera and lens set-up that actually took this picture? that's the one that's impressive...

Canon RF 600mm Prime Lens
canon_rf_600mm_f_4_l_is_usm_lens_1042944.jpg
Click to expand...
My guess. In case you didn't know I did photography for a while. He has a remote trigger likely the device on the hot shoe of the camera triggering another camera set up on a tripod pointed at him. It will sync both cameras. They are used for studio set ups to trigger the studio lights too.
 
grapehead said:
Village Customs down in Clayton. They build some rad shit and some wacky shit. Their open house party thing is Sept 6, worth going.
Click to expand...

Yep. They did a rat rod for a friend of mine. First time seeing this one in the wild though.

Duane
 
jeepinmatt said:
Hauled 2743 pounds of scrap today.
View attachment 441882

In the bed of the 2500 too! Only squatted it about 2-3", but you could definitely feel it back there, especially floating down the interstate.

View attachment 441883
Click to expand...
rookie....the idiots loaded a triaxle gooseneck and took off to Gordons today....truck, trailer, and load was 31k😂😂😂😂

Had a old steam boiler on it and a 2000 gallon steel tank from a truck on it loaded to the gills. No chance id ever attempt that level of stupid.
 
WARRIORWELDING said:
rookie....the idiots loaded a triaxle gooseneck and took off to Gordons today....truck, trailer, and load was 31k😂😂😂😂

Had a old steam boiler on it and a 2000 gallon steel tank from a truck on it loaded to the gills. No chance id ever attempt that level of stupid.
Click to expand...
Saw this yesterday, coming down the mountain on 77 from VA to NC. That's a JCB 506, tipping the scale at ~22k LBs behind a Chevy 3500. Also had several pallets of stuff on the trailer.



20250716_175349.jpg
 
jeepinmatt said:
31k GCW on a triaxle goose sounds reasonable to me.
Click to expand...
Cant tell if the font is sarcastic. Isnt over 26k a whole lot of paper work with the man?
 
Wish I could have gotten a pic, but saw on I-485 Tuesday an F250 towing another F250. the one being towed was rolling on its front wheels. Rear wheels had been removed. It had a pintle hitch turned 90 degrees attached to the tow vehicle’s pintle hitch. I’m not even sure how they could turn right at an intersection without the rear bumpers hitting.
 
WARRIORWELDING said:
Cant tell if the font is sarcastic. Isnt over 26k a whole lot of paper work with the man?
Click to expand...
If you get pulled over, yes. Unless you have a CDL, in which case it’s just overweight, unless you have sufficient weight tax on the tow rig, in which case it’s legal. Most of the newer 3500-5500 series trucks are rated for like 40k GCWR. Even the 3/4 tons are rated to tow like 20k, which puts GCW over 26000.
 
Back
Top