Round tubing sizes

[Futbalfantic]

Im looking for a 2-1/8 OD 3/8 wall
or 2.125 OD .375 wall

Its that and avaible size?

 

[RatLabGuy]

I dunno but Holy Crap that' some thick tubing. ID will be only 1 3/8", is that the point?

 

[Yay!Gurrr]

When i needed an odd size tube for my cherry picker swivel I found a site on EBay that had a pile of stuff listed and a number to call for just about anything else, basically they cut it by the inch and they had TONs of sizes.. While not super cheep it was priced fair and they had it and was to my door in a few days...

 

[Rich]

2" DOM will be far easier and cheaper to buy.

 

[Futbalfantic]

need to be 2-1/8 and 3/8s wall will be 1-1/2 ID. Yager do you know who the seller is?

 

[Rich]

need to be 2-1/8 and 3/8s wall will be 1-1/2 ID.

Better check yer math..

 

[Futbalfantic]

1-3/4?

 

[Rich]

1-3/4?

try again.

Here's your bone:

~~~~~~~~2.125
minus--------.375
minus--------.375
=================
1.375, or 1-3/8 for the decimally challenged.

 

[Futbalfantic]

well im a dumbarse sorry there ratlab. long day

 

[RatLabGuy]

If you want the ID to be 1.5 and OD to be 2.125 then thickness is 5/16ths. Good luck finding that too.

What's important here, ID, OD, or thickness?

 

[Futbalfantic]

OD and ID
OD 2-1/8 and ID 1.625 thats 1-5/8 right

 

[RatLabGuy]

yes, 1.625 = 1 5/8
(Now see how stupid the English system is, Metric is the way to go!)
For 2.125 OD and 1.625 ID, your thickness is 1/4" (or.250), much easier to find.

 

[Rich]

gotta ask,WTF is this for?

 

[Futbalfantic]

haha Ill do a write up when I get all of my chit together