That is not the trackbar bracket I was speaking of smart guy. Rough Country includes a stupid little bracket that bolts into the LOWER trackbar mount to move the mounting hole location on their 4" lift......not remotely similar to the UPPER trackbar mount that is used in conjunction with a replacement chromoly trackbar to change the front end suspension geometry correctly........since you needed to bring that up.
Besides the fact that that bracket doesn't even come with the 4" short arm kit you were originally using as your comparison. That is from the 4.5"-5.5" long arm kit and it is used in conjunction with the DPA to adjust the trackbar/steering geometry for that particular lift.
Just so we are clear.......
By the way, they may not be 100% made in the usa (I am sure some component may come from outside, but I have been to their main mfg facility here in CA and most everything is made here).....however, I do know for a fact that they were the innovator (actually I know the guy who designed the adjustable cartridge "johnny joint" style joint as a redesign/improvement to Currie's) on that particular joint that Rough Country decided to copy.
